Dura-Haul 6 x 12 14K Dump Trailer With Scissor Lift

The Dura-Haul 6x12’s are built from the ground up. They start out on two 7k Rockwell axles with a multi-leaf spring suspension and equalizer. Next, there is one piece of 6-inch I-Beam frame that starts at the front of the trailer where the adjustable coupler ties in, clear back to the two rear pivot points of the dump box that lifts to a 45-degree angle. All Dura-Haul 14K dump trailers come with the 7-gauge floor and 10-gauge walls. The floor is supported by 3-inch channel crossmembers every 16 inches in the underbelly of the dump box. The 10-guage walls also flare out to 78-inches above the fenders to provide the maximum amount of room for those larger loads. Dura-Haul does not cut corners on their rails, the side walls will roll out, and then back down where they tie into the side walls to provide that extra support for the dump box. Dura-Haul also powder coats every trailer in a five-step painting process. Another thing you will see is that all exterior electrical is encased in a molded harness. The Dura-Haul’s also come loaded accessories.